SubAssy | Category | Item | Thumbnail | Part Name | Part Description | Make/Buy | Included in
XYHD12_CFx kit? |
QTY | Comment | Vendor | Vendor URL | |||||
OPTION_HD12_CFX_MGN9 | Buy | 1 |
|
Dowel_Pin_5mmX40mm | Pin, Dowel - 5x40mm | Buy | 2 | *Make sure these
pins are not 5.00mm or more. They need to be 4.98 in order to fit the Idlers
bearing properly. Most 5mm dowel pins
on the market will be 4.98mm Can also be replaced with 5mm full carbon rods |
||||||||
OPTION_HD12_CFX_MGN9 | Buy | 2 |
|
Dowel_Pin_5mmX30mm | Pin, Dowel - 5x30mm | Buy | 2 | *Make sure these pins are not 5.00mm or more. They need to
be 4.98 in order to fit the Idlers bearing properly. Most 5mm dowel pins on the market will be
4.98mm Can also be replaced with 5mm full carbon rods |
||||||||
OPTION_HD12_CFX_MGN9 | Buy | 3 |
|
Gates_2GT_20T_12MM_Smooth | Pulley, Smooth Idler - 12mmGT2 5mm bore | Buy | 2 | AliExpress - Mellow Store | https://s.click.aliexpress.com/e/_9If3uR | |||||||
OPTION_HD12_CFX_MGN9 | Buy | 4 |
|
Gates_2GT_20T_12MM_Toothed | Pulley, Toothed Idler - 12mmGT2 5mm bore | Buy | 2 | AliExpress - Mellow Store | https://s.click.aliexpress.com/e/_9If3uR | |||||||
OPTION_HD12_CFX_MGN9 | Buy | 5 |
|
MGN9 Rail and Block Assy | NOTE!! Length for the X rail of this config is longer than Regular HD12 | Buy | 1 | Suggested to buy 400mm length rail for 315x315 build. Rail will need to be cut to length (375mm for a 315x315 build). It is assumed that the end hole position is as per Hiwin Specs: | Hiwin Specs | Any Good Quality MGN9H Rail and Block assy will do. | ||||||
OPTION_HD12_CFX_MGN9 | Buy + Fabricate | 6 |
|
CarbonFiberTube_20x20x1.8 v1 | Cut To Length and drill | Buy | 1 | Center and
position rail using Y carriages and use rail as drill jig. See: PositionningTool_MGN9_V1.1.stl |
Aliexpress - TianYuQi | https://s.click.aliexpress.com/e/_ABtMKb | ||||||
OPTION_HD12_CFX_MGN9 | Hardware | 7 |
|
M3X10_CapScrew_92290A115 | Screw, Cap - M3X10mm | Buy | 4 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 8 |
|
M3_Nut_94150A325 | Nut, Hex - M3 | Buy | 15 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 9 |
|
M4_Nut_94150A335 | Nut, Hex - M4 | Buy | 2 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 10 |
|
M3X6_CapScrew_92290A111 | Screw, Cap - M3X6mm | Buy | 4 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 11 |
|
M5_HexNut_94150A340 | Nut, Hex - M5 | Buy | 2 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 12 |
|
M3X40_CapScrew_92290A128 | Screw, Cap - M3X40mm | Buy | 6 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 13 |
|
M4X40_CapScrew_91290A174 | Screw, Cap - M4X40mm | Buy | 2 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 14 |
|
M5X45_CapScrew_91290A260 | Screw, Cap - M5X45mm | Buy | 2 | |||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 15 |
|
M3_Washer_Flat_98690A110 | Buy | 9 | ||||||||||
OPTION_HD12_CFX_MGN9 | Hardware | 16 |
|
M3X8_CapScrew_92290A113 | Screw, Cap - M3X8mm | Buy | 9 | |||||||||
OPTION_HD12_CFX_MGN9 | 17 |
|
HD_CFx_MGN9_CFTube Insert | Make | 2 | Thingiverse | https://www.thingiverse.com/thing:4886459 | |||||||||
OPTION_HD12_CFX_MGN9 | 18 |
|
HD12_CFx_MGN9_YCarriage_LH_UpperBody v1 | Make | 1 | For CF tube
within 20.3-20.5mm use V1 Files For CF Tubes within 20.1-20.2mm use V1.1 Files |
Thingiverse | https://www.thingiverse.com/thing:4886459 | ||||||||
OPTION_HD12_CFX_MGN9 | 19 |
|
HD12_CFx_MGN9_YCarriage_LH_LowerBody v1 | Make | 1 | For CF tube within 20.3-20.5mm use V1
Files For CF Tubes within 20.1-20.2mm use V1.1 Files |
Thingiverse | https://www.thingiverse.com/thing:4886459 | ||||||||
OPTION_HD12_CFX_MGN9 | 20 |
|
HD12_CFx_MGN9_YCarriage_RH_UpperBody v1 | Make | 1 | For CF tube
within 20.3-20.5mm use V1 Files For CF Tubes within 20.1-20.2mm use V1.1 Files |
Thingiverse | https://www.thingiverse.com/thing:4886459 | ||||||||
OPTION_HD12_CFX_MGN9 | 21 |
|
HD12_CFx_MGN9_YCarriage_RH_LowerBody v1 | Make | 1 | For CF tube within 20.3-20.5mm use V1
Files For CF Tubes within 20.1-20.2mm use V1.1 Files |
Thingiverse | https://www.thingiverse.com/thing:4886459 |