SubAssy	Category	Item	Thumbnail	Part Name	Part Description	Make/Buy	QTY	Comment	Vendor	Vendor URL
HextrudORT_Carriage_HD12	BUY	1		NEMA_LDO_36STH17-1004AHG v6			1	WARNING!! DO NOT SET CURRENT HIGHER THAN 0.400ma in your printer config file. These motors are Class H and are rated for 180C, they can become VERY HOT and might melt your carriage Spec: https://miragec79.github.io/HextrudORT/docs/LDO-36STH17-1004AHG-RevA_1.pdf Important Note: ref: https://github.com/MirageC79/HextrudORT/issues/9 Depending on source of components, printing tolerances and the fact that the design clearances are reduced to a minimal, you may need to file/trim a section of the Nema 14 motor to clear the XY cross member. This modifcation will not affect motor performance or reliability.
HextrudORT_Carriage_HD12	BUY	2		Opto endstop PM	Optical End-Stop	Buy	1
HextrudORT_Carriage_HD12	HARDWARE	4		M3_Nut_94150A325	Nut, Hex - M3	Buy	5
HextrudORT_Carriage_HD12	HARDWARE	5		M2.5X8_CapScrew_92290A058	Screwm Cap_M2.5 X 8mm	Buy	1
HextrudORT_Carriage_HD12	HARDWARE	6		M3X6_CapScrew_92290A111	Screw, Cap - M3X6mm	Buy	5
HextrudORT_Carriage_HD12	HARDWARE	7		M3X12_CapScrew_92290A117	Screw, Cap - M3X12mm	Buy	2
HextrudORT_Carriage_HD12	HARDWARE	8		M3X14_CapScrew_92290A118	Screw, Cap - M3X14	Buy	1
HextrudORT_Carriage_HD12	HARDWARE	9		M3X25_CapScrew_92290A124	Screw, Cap - M3X25mm	Buy	1
HextrudORT_Carriage_HD12	HARDWARE	10		M3X30_CapScrew_92290A126	Screw, Cap - M3X30mm	Buy	2
HextrudORT_Carriage_HD12	HARDWARE	11		M4X40_CapScrew_91290A174	Screw, Cap - M4X40mm	Buy	1
HextrudORT_Carriage_HD12	MAKE	12		HextrudORT_HD12_CarriageBAckPlate_Body OR HextrudORT_HD12_CarriageBAckPlate_Body_BB	3D Printed	Make	1	NOTE ! For Big Bearings (MR95 5X9X2.5) use: HextrudORT_HD12_CarriageBAckPlate_Body_BB.stl For Bearing provided with BMG (MR85 5x8x2.5) use: HextrudORT_HD12_CarriageBAckPlate_Body.stl	Thingiverse Alternate: GitHub	https://www.thingiverse.com/thing:4790412 alternate: https://github.com/MirageC79/HextrudORT/tree/main/files/CARRIAGE/HD12/STL
HextrudORT_Carriage_HD12	MAKE	13		HextrudORT_HD12_Carriage_Body	3D PRinted	Make	1		Thingiverse Alternate: GitHub	https://www.thingiverse.com/thing:4790412 alternate: https://github.com/MirageC79/HextrudORT/tree/main/files/CARRIAGE/HD12/STL
HextrudORT_Carriage_HD12	MAKE	14		HextrudORT_HD12_OpticalSupport_Body v2	3D Printed	Make	1		Thingiverse Alternate: GitHub	https://www.thingiverse.com/thing:4790412 alternate: https://github.com/MirageC79/HextrudORT/tree/main/files/CARRIAGE/HD12/STL
HextrudORT_Carriage_HD12	BUY	3a		OPTION B: Bearing_MR85 (from BMG)	Bearing 5X8X2.5	BUY	1*	OPTION B Use MR85 5x8x2.5 bearings from BMG
HextrudORT_Carriage_HD12	BUY	3b		Bearing_MR95_7804K105	Bearing, 9X5X3	Buy	1*	OPTION A These are BIGGER bearings than the ones used in the BMG.  To be used with Back Plate and cover marked with "BB"