SubAssy Category Item Thumbnail Part Name Part Description Make/Buy QTY Comment Vendor Vendor URL
Bondtech BMG parts                    
HextrudORT_HotEnd_DRAGON BUY 1
thumbnail_4.png
Bondetech mini gears 1.75/5.0 Included in BMG Internals Set for HextrudORT (BUY) KIT 1 Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings,M3x2 setscrew and one 3 x 20 mm shaft. Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_DRAGON BUY 2
thumbnail_1.png
Bondtech_Shaft_assembly Included in BMG Internals Set for HextrudORT (BUY) KIT 1 Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders.
It includes the set screw for primary 1.75/5.0 drive gear.
Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_DRAGON BUY 3
thumbnail_5.png
Bondtech_Thumbscrew_assembly v1 Included in BMG Internals Set for HextrudORT (BUY) KIT 1 From BMG Extruder Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_DRAGON BUY 4
thumbnail_14.png
TensionArm_Pin Included in BMG Internals Set for HextrudORT (BUY) KIT 1 From BMG Extruder 3 X 20 Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_DRAGON BUY 5
thumbnail_1.png
PTFE Tube Retainer Included in BMG Internals Set for HextrudORT (BUY) KIT 1 From BMG Extruder Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_DRAGON BUY 6a
thumbnail_7.png
OPTION A: Bearing_MR85 (from BMG) Included in BMG Internals Set for HextrudORT (BUY) KIT 2* OPTION A
Use MR85 5x8x2.5 bearings from BMG

*Qty1 bearing will be used in the carriage BOM.  Qty 1 required in this assembly + 1 in carriage = 2 for the printer
Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
Dragon HextrudORT                    
HextrudORT_HotEnd_DRAGON BUY 6b
thumbnail_7.png
OPTION B: Bearing_MR95_7804K105 Bearing 5X9X3 BUY 1* OPTION B
These are BIGGER bearings than the ones used in the BMG.
 To be used with Back Plate and cover marked with "BB"
   
HextrudORT_HotEnd_DRAGON BUY 7
thumbnail_44.png
bltouch   BUY 1      
HextrudORT_HotEnd_DRAGON MAKE 8
thumbnail_8.png
PTFE_Guide Comes with BMG clones MAKE 1 Make from 4mm OD PTFE tube:
1 - Using Xacto blade, create internal chamfer in one end.
2 - Cut that end into an arrow shape (try to match the angle from the HextrudORT body where the hobb gears meet.
3 - Insert into HextrudORT body and cut excess length flush. 
   
HextrudORT_HotEnd_DRAGON BUY 9
thumbnail_7.png
DRAGON HOTEND Hight temp or Standard BUY 1   AliExpress

Phaetus
https://s.click.aliexpress.com/e/_AD0Qow

https://www.phaetus.com/?page_id=15+A8
HextrudORT_HotEnd_DRAGON HARDWARE 9
thumbnail_9.png
M2.5X6_CapScrew_92290A056 Screw, Capr_M2.5 X 6mm Buy 3      
HextrudORT_HotEnd_DRAGON HARDWARE 10
thumbnail_10.png
M3_Nut_94150A325 Nut, Hex - M3 Buy 2      
HextrudORT_HotEnd_DRAGON HARDWARE 11
thumbnail_11.png
M3X25_CapScrew_92290A124 Screw, Cap - M3X25mm Buy 1      
HextrudORT_HotEnd_DRAGON HARDWARE 12
thumbnail_12.png
M3X20_CapScrew_92290A122 Screw, Cap - M3X20mm Buy 1      
HextrudORT_HotEnd_DRAGON HARDWARE 13
thumbnail_13.png
M3X8_CapScrew_92290A113 Screw, Cap - M3X8mm Buy 1      
HextrudORT_HotEnd_DRAGON MAKE 10a
thumbnail_19.png
BlTouchSupport for STDHT MGN9 & MGN12 Carriage 3D Printed MAKE 1* * OPTION BlTouchSupport for STDHT MGN9 & MGN12 Carriage    
HextrudORT_HotEnd_DRAGON MAKE 10b To come BLTouch support for HD9 3D Printed MAKE 1* * OPTION BlTouchSupport for HD9 Carriage    
HextrudORT_HotEnd_DRAGON MAKE 10c
thumbnail_20.png
BLTouch support for HD12 3D Printed MAKE 1* * OPTION BlTouchSupport for HD12 Carriage    
HextrudORT_HotEnd_DRAGON MAKE 11
thumbnail_4.png
HextrudORT_DRAGON_TENSION_ARM 3D_Printed   1 NOTE !
Make sure your printer is well calibrated, these are small and precise parts.

Recommended print settings:
- 0.16 Layer height
- Support interface: yes
- Full fan at first support interfacing layer
   
HextrudORT_HotEnd_DRAGON MAKE 12
thumbnail_6.png
HextrudORT_COVER 3D_Printed   1 NOTE !
For Big Bearings (MR95 5X9X2.5) use:
HextrudORT_COVER_BB.STL

For Bearing provided with BMG (MR85 5x8x2.5) use:
HextrudORT_COVER.STL
   
HextrudORT_HotEnd_DRAGON MAKE 13
thumbnail_6.png
HextrudORT_DRAGON_Body_V1 3D Printed   1 NOTE !
Make sure your printer is well calibrated, these are small and precise parts.

Recommended print settings:
- 0.16 Layer height
- Support interface: yes
- Full fan at first support interfacing layer