| SubAssy | Category | Item | Thumbnail | Part Name | Part Description | Make/Buy | QTY | Comment | Vendor | Vendor URL | |||||
| Bondtech BMG parts | |||||||||||||||
| HextrudORT_HotEnd_E3D | BUY | 1 |
|
Bondetech mini gears 1.75/5.0 | Included in BMG Internals Set for HextrudORT | (BUY) KIT | 1 | Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings,M3x2 setscrew and one 3 x 20 mm shaft. | Bondtech | https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/ | |||||
| HextrudORT_HotEnd_E3D | BUY | 2 |
|
Bondtech_Shaft_assembly | Included in BMG Internals Set for HextrudORT | (BUY) KIT | 1 | Replacement Shaft assembly for
our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear. |
Bondtech | https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/ | |||||
| HextrudORT_HotEnd_E3D | BUY | 3 |
|
Bondtech_Thumbscrew_assembly v1 | Included in BMG Internals Set for HextrudORT | (BUY) KIT | 1 | From BMG Extruder | Bondtech | https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/ | |||||
| HextrudORT_HotEnd_E3D | BUY | 4 |
|
TensionArm_Pin | Included in BMG Internals Set for HextrudORT | (BUY) KIT | 1 | From BMG Extruder 3 X 20 | Bondtech | https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/ | |||||
| HextrudORT_HotEnd_E3D | BUY | 5 |
|
PTFE Tube Retainer | Included in BMG Internals Set for HextrudORT | (BUY) KIT | 1 | From BMG Extruder | Bondtech | https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/ | |||||
| HextrudORT_HotEnd_E3D | BUY | 6a |
|
OPTION A: Bearing_MR85 (from BMG) | Included in BMG Internals Set for HextrudORT | (BUY) KIT | 2* | OPTION
A Use MR85 5x8x2.5 bearings from BMG *Qty1 bearing will be used in the carriage BOM. Qty 1 required in this assembly + 1 in carriage = 2 for the printer |
Bondtech | https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/ | |||||
| E3D V6 HextrudORT | |||||||||||||||
| HextrudORT_HotEnd_E3D | BUY | 6b |
|
OPTION B: Bearing_MR95_7804K105 | Bearing 5X9X3 | BUY | 1* | OPTION B These are BIGGER bearings than the ones used in the BMG. To be used with Back Plate and cover marked with "BB" |
|||||||
| HextrudORT_HotEnd_E3D | MAKE | 7 |
|
PTFE_Guide | Comes with BMG clones Any 2mm ID PTFE will do |
MAKE | 1 | Make
from 4mm OD PTFE tube: 1 - Using Xacto blade, create internal chamfer in one end. 2 - Cut that end into an arrow shape (try to match the angle from the HextrudORT body where the hobb gears meet. 3 - Insert into HextrudORT body and cut to match internal length of the E3D HeatSink. |
|||||||
| HextrudORT_HotEnd_E3D | BUY | 8 |
|
E3D HeatSink | From Slice Engineering | BUY | 1 | Note: this HextrudORT config can also accomodate the Mosquito Magnum and the Mosquito Magnum +. BLTouch Bracket and Part Cooling Fan duct need to be modified to accept the Magnum +. | |||||||
| OptionA - E3DV6 | |||||||||||||||
| HextrudORT_HotEnd_E3D | BUY | 9 - Option A |
|
E3D V6 HotEnd | E3D or Clone | BUY | 1* | Simply use this code when checking out :) : 10offe3d | E3D-Online | https://e3d-online.com/ | |||||
| HextrudORT_HotEnd_E3D | MAKE | 10(A1) |
|
V6 BLTouch support for: HD12 |
3D Printed | MAKE | 1* | * Select BlTouch Bracket to fit your selected HextrudORT carriage. | |||||||
| HextrudORT_HotEnd_E3D | MAKE | 10(A2) |
|
V6
BLTouch support for: STDHT MGN9 |
3D Printed | MAKE | 1* | * Select BlTouch Bracket to fit your selected HextrudORT carriage. | |||||||
| HextrudORT_HotEnd_E3D | MAKE | 10(A3) |
|
V6 BLTouch support for: STDHT MGN12 |
3D Printed | MAKE | 1* | * Select BlTouch Bracket to fit your selected HextrudORT carriage. | |||||||
| HextrudORT_HotEnd_E3D | MAKE | 10(A4) | To Come | Volcano BLTouch support for HD9 | 3D Printed | MAKE | 1* | Not
Available Yet * Select BlTouch Bracket to fit your selected HextrudORT carriage. |
|||||||
| OptionB- E3DVolcano | |||||||||||||||
| HextrudORT_HotEnd_E3D | BUY | 9 - Option B |
|
E3D Volcano HotEnd | E3D or Clone | BUY | 1* | Simply use this code when checking out :) : 10offe3d | E3D-Online | https://e3d-online.com/ | |||||
| HextrudORT_HotEnd_E3D | MAKE | 10(B1) |
|
Volcano BLTouch support for: HD12 |
3D Printed | MAKE | 1* | * Select BlTouch Bracket to fit your selected HextrudORT carriage. | |||||||
| HextrudORT_HotEnd_E3D | MAKE | 10(B2) |
|
Volcano
BLTouch support for: STDHT MGN9 |
3D Printed | MAKE | 1* | * Select BlTouch Bracket to fit your selected HextrudORT carriage. | |||||||
| HextrudORT_HotEnd_E3D | MAKE | 10(B3) |
|
Volcano BLTouch support for: STDHT MGN12 |
3D Printed | MAKE | 1* | * Select BlTouch Bracket to fit your selected HextrudORT carriage. | |||||||
| HextrudORT_HotEnd_E3D | MAKE | 10(B4) | To come | Volcano BLTouch support for HD9 | 3D Printed | MAKE | 1* | Not
Available Yet * Select BlTouch Bracket to fit your selected HextrudORT carriage. |
|||||||
| HextrudORT_HotEnd_E3D | BUY | 10 |
|
bltouch | Z Probe sensor, BL touch | BUY | 1 | Better results will be obtained with OEM AntClabs BlTouch. | |||||||
| HextrudORT_HotEnd_E3D | HARDWARE | 11 |
|
M3_Nut_94150A325 | Nut, Hex - M3 | BUY | 5 | ||||||||
| HextrudORT_HotEnd_E3D | HARDWARE | 13 |
|
M3X25_CapScrew_92290A124 | Screw, Cap - M3X25mm | BUY | 1 | ||||||||
| HextrudORT_HotEnd_E3D | HARDWARE | 14 |
|
M3X20_CapScrew_92290A122 | Screw, Cap - M3X20mm | BUY | 3 | ||||||||
| HextrudORT_HotEnd_E3D | HARDWARE | 15 |
|
M3X6_CapScrew_92290A111 | Screw, Cap - M3X6mm | BUY | 2 | ||||||||
| HextrudORT_HotEnd_E3D | MAKE | 16 |
|
HextrudORT_TENSION_ARM | 3D_Printed | MAKE | 1 | NOTE ! Make sure your printer is well calibrated, these are small and precise parts. Recommended print settings: - 0.16 Layer height - Support interface: yes - Full fan at first support interfacing layer |
|||||||
| HextrudORT_HotEnd_E3D | MAKE | 17 |
|
HextrudORT_COVER | 3D_Printed | MAKE | 1 | NOTE ! For Big Bearings (MR95 5X9X2.5) use: HextrudORT_COVER_BB.STL For Bearing provided with BMG (MR85 5x8x2.5) use: HextrudORT_COVER.STL |
|||||||
| HextrudORT_HotEnd_E3D | MAKE | 18 |
|
HextrudORT_V6Holder | 3D_Printed | MAKE | 1 | ||||||||
| HextrudORT_HotEnd_E3D | MAKE | 19 |
|
HextrudORT_BODY_MOSQUITO | 3D Printed | MAKE | 1 | NOTE ! Make sure your printer is well calibrated, these are small and precise parts. Recommended print settings: - 0.16 Layer height - Support interface: yes - Full fan at first support interfacing layer |
