SubAssy Category Item Thumbnail Part Name Part Description Make/Buy QTY Comment Vendor Vendor URL
Bondtech BMG parts                    
HextrudORT_HotEnd_RAPIDO BUY 1
thumbnail_4.png
Bondetech mini gears 1.75/5.0 Included in BMG Internals Set for HextrudORT (BUY) KIT 1 Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings,M3x2 setscrew and one 3 x 20 mm shaft. Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_RAPIDO BUY 2
thumbnail_1.png
Bondtech_Shaft_assembly Included in BMG Internals Set for HextrudORT (BUY) KIT 1 Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders.
It includes the set screw for primary 1.75/5.0 drive gear.		 Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_RAPIDO BUY 3
thumbnail_5.png
Bondtech_Thumbscrew_assembly v1 Included in BMG Internals Set for HextrudORT (BUY) KIT 1 From BMG Extruder Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_RAPIDO BUY 4
thumbnail_14.png
TensionArm_Pin Included in BMG Internals Set for HextrudORT (BUY) KIT 1 From BMG Extruder 3 X 20 Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_RAPIDO BUY 5
thumbnail_1.png
PTFE Tube Retainer Included in BMG Internals Set for HextrudORT (BUY) KIT 1 From BMG Extruder Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
HextrudORT_HotEnd_RAPIDO BUY 6a
thumbnail_7.png
OPTION A: Bearing_MR85 (from BMG) Included in BMG Internals Set for HextrudORT (BUY) KIT 2* OPTION A
Use MR85 5x8x2.5 bearings from BMG

*Qty1 bearing will be used in the carriage BOM.  Qty 1 required in this assembly + 1 in carriage = 2 for the printer		 Bondtech https://www.bondtech.se/product/bmg-internals-set-for-hextrudort/
Dragon HextrudORT                    
HextrudORT_HotEnd_RAPIDO BUY 6b
thumbnail_7.png
OPTION B: Bearing_MR95_7804K105 Bearing 5X9X3 BUY 1* OPTION B
These are BIGGER bearings than the ones used in the BMG.
 To be used with Back Plate and cover marked with "BB"		 Aliexpress https://s.click.aliexpress.com/e/_AZtQjU
HextrudORT_HotEnd_RAPIDO BUY 7
thumbnail_44.png
bltouch   BUY 1      
HextrudORT_HotEnd_RAPIDO MAKE 8
thumbnail_8.png
PTFE_Guide Comes with BMG clones MAKE 1 Make from 4mm OD PTFE tube:
1 - Using Xacto blade, create internal chamfer in one end.
2 - Cut that end into an arrow shape (try to match the angle from the HextrudORT body where the hobb gears meet.
3 - Insert into HextrudORT body and cut excess length flush. 		    
HextrudORT_HotEnd_RAPIDO BUY 9a
thumbnail_13.png
RAPIDO HOTEND Standard  BUY 1 Phaetus Rapido Hot End Phaetus: https://www.phaetus.com/rapido-hotend/

Aliexpress		 https://s.click.aliexpress.com/e/_9xIrem
HextrudORT_HotEnd_RAPIDO BUY 9b
thumbnail_18.png
RAPIDO HOTEND UHF Ultra High Flow - with melt zone extender BUY 1 This version adds a small 8.5mm longg extender to the meltzone, making possible the use of E3D Volcano nozzles Phaetus: https://www.phaetus.com/rapido-hotend/

Aliexpress		 https://s.click.aliexpress.com/e/_9xIrem
HextrudORT_HotEnd_RAPIDO BUY 10
thumbnail_14.png
2510 Fan - 25mm*10mm 2510 fan BUY 2   Aliexpress https://s.click.aliexpress.com/e/_9wYbbC
HextrudORT_HotEnd_RAPIDO HARDWARE 11
thumbnail_9.png
M2.5X6_CapScrew_92290A056 Screw, Capr_M2.5 X 6mm Buy 3      
HextrudORT_HotEnd_RAPIDO HARDWARE 12
thumbnail_10.png
M3_Nut_94150A325 Nut, Hex - M3 Buy 2      
HextrudORT_HotEnd_RAPIDO HARDWARE 13
thumbnail_11.png
M3X25_CapScrew_92290A124 Screw, Cap - M3X25mm Buy 1      
HextrudORT_HotEnd_RAPIDO HARDWARE 14
thumbnail_12.png
M3X20_CapScrew_92290A122 Screw, Cap - M3X20mm Buy 1      
HextrudORT_HotEnd_RAPIDO HARDWARE 15
thumbnail_13.png
M3X8_CapScrew_92290A113 Screw, Cap - M3X8mm Buy 1      
STD/HT                    
HextrudORT_HotEnd_RAPIDO MAKE 10a To come BlTouchSupport for STDHT MGN9 & MGN12 Carriage 3D Printed MAKE 1* * OPTION BlTouchSupport for STDHT MGN9 & MGN12 Carriage Not Ready  
HD9                    
HextrudORT_HotEnd_RAPIDO MAKE 10b To come BLTouch support for HD9 3D Printed MAKE 1* * OPTION BlTouchSupport for HD9 Carriage Not Ready  
HD12                    
HextrudORT_HotEnd_RAPIDO MAKE 10C1
thumbnail_17.png
BLTouch support for HD12 RAPIDO 3D Printed   1 For HextrudORT HD12 Rapido standard.    
HextrudORT_HotEnd_RAPIDO MAKE 10C2
thumbnail_20.png
BLTouch support for HD12 RAPIDO UHF 3D Printed   1 For HextrudORT HD12 Rapido UHF (Ultra High Flow)    
HextrudORT_HotEnd_RAPIDO MAKE 13
thumbnail_9.png
Rapido Structural Fan Mount HD12 3D Printed   1 For HextrudORT HD12 Rapido Standard and High Flow. This fan shroud acts as an additional mouting point for the RAPIDO hotend.    
HextrudORT_HotEnd_RAPIDO MAKE 13
thumbnail_19.png
HORTPC_RapidoUHF_Spacer HD12_MGN9 3D Printed   1 RAPIDO UHF spacer for HORTPC HevORT Remote Turbine Part Cooling    
HextrudORT_HotEnd_RAPIDO MAKE 13
thumbnail_16.png
HORTPC_Rapido_HD12_MGN9 3D Printed (Resin)**   1 HD12 MGN9 Rapido HORTPC - HevORT Remote Turbine Part Cooling
**Recommended to be printed from SLA (Resin Printer)		    
HextrudORT RAPIDO                    
HextrudORT_HotEnd_RAPIDO MAKE 11
thumbnail_8.png
HextrudORT_DRAGON_RAPIDO TENSION_ARM_V1.5 3D_Printed   1 HextrudORT Rapido / Dragon Tension Arm.
V1.5 adds some rigidity for better print quality.		    
HextrudORT_HotEnd_RAPIDO MAKE 12
thumbnail_5.png
HextrudORT_COVER 3D_Printed   1 NOTE !
For Big Bearings (MR95 5X9X2.5) use:
HextrudORT_COVER_BB.STL

For Bearing provided with BMG (MR85 5x8x2.5) use:
HextrudORT_COVER.STL		    
HextrudORT_HotEnd_RAPIDO MAKE 13
thumbnail_6.png
HextrudORT_DRAGON_RAPIDO Body_V1.5 3D Printed   1 NOTE !
Make sure your printer is well calibrated, these are small and precise parts.

Recommended print settings:
- 0.16 Layer height
- Support interface: yes
- Full fan at first support interfacing layer		    
HextrudORT_HotEnd_RAPIDO MAKE 13
thumbnail_15.png
Rapido Fan Shroud 3D Printed   1 Standard fan shroud for Rapido by MirageC